menginstal
unreal sebenarnya mudah saja, bahkan menurut saya fitur2 nya
lebih lengkap di bandingkan jenis IRCD yg lainnya, berikut saya berikan
sedikit tutorial menginstal IRCD dengan Unreal versi 3.2.7 :
- masuk ke shells root account anda,
kemudian berikan command :
[root@pengecute] wget
http://unrealircd.icedslash.com/Unreal3.2.8.1.tar.gz
- extract file tersebut : [root@pengecute] tar -zxvf
Unreal3.2.8.1.tar.gz
-masuk ke direktory unreal :
[root@pengecute] cd Unreal3.2.8.1
- lakukan proses configurasi : [root@pengecute/Unreal3.2.8.1] ./Config
Installing 17% <-- tekan enter
seterusnya sampai 100%
terdapat beberapa pilihan :
==[ ADDITIONAL INFO ]== * See ChangeLog
[Enter to continue] Do you
want to enable the server anti-spoof protection? [No] -> enter What directory are all the server
configuration files in?
[/usr/local/username/Unreal3.2/] -> enter What is the path to the ircd binary
including the name of the binary? [/usr/local/username/Unreal3.2/src/ircd] -> enter Would you like to compile as a hub or as a
leaf? Type Hub to select hub
and Leaf to select leaf.
[Hub] -> enter What is
the hostname of the server running your IRCd? -> enter What should the default permissions for
your configuration files be? (Set this to 0 to disable) It is strongly recommended that you use 0600
to prevent unwanted reading of the file [0600] - > enter Do you want to support SSL (Secure Socket
Layer) connections? [No]
-> enter Do you want to
enable IPv6 support? [No]
-> enter Do you want to
enable ziplinks support?
[No] -> enter Do you want
to enable remote includes?
[No] -> enter Do you want
to enable prefixes for chanadmin and chanowner? This will give +a the & prefix and ~ for
+q (just like +o is @)
Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient,
PJIRC, etc.) with the notable exceptions of irssi, KVIrc and CGI:IRC. This feature should be enabled/disabled
network-wide. [No] ->
enter What listen() backlog
value do you wish to use? Some older servers have problems with more than 5, others work
fine with many more. [5]
-> enter How far back do
you want to keep the nickname history? [2000] -> enter What is the maximum sendq length you wish to
have? [3000000] -> enter How many buffer pools would you like? This number will be multiplied by
MAXSENDQLENGTH. [18] ->
enter How many file
descriptors (or sockets) can the IRCd use? [1024] -> enter Would you like any more parameters to
configure? Write them here: [] -> enter
setelah tahapan diatas, akan muncul : Now all you have to do is type 'make' and
let it compile. When that's
done, you will receive other instructions on what to do next.
-maka ketik : [root@pengecute/Unreal3.2.8.1] make
proses instalasi akan berjalan, untuk
menyempurnakan proses compile ircd, lanjutkan dengan menjalankan
perintah :
[root@pengecute/Unreal3.2.8.1] make install
- ok, skrg ircd udh selesai, tinggal di run,
tetapi sebelumnya, edit
terlebih dahulu file unrealircd.conf, UPSSS, dimana file itu?? koq gak
ada?? wolooooh susah2, enakan download aja yg udh saya setting,
hehehhe, tinggal edit ntar, maka jalankan perintah : [root@pengecute/Unreal3.2.8.1] wget
http://www.lifesjourneynetwork.com//plugins/safehtml//HTMLSax3/unrealconf.tar.gz
-extract file tersebut : [root@pengecute/Unreal3.2.8.1] tar -zxvf
unrealconf.tar.gz
-
seeep, skrg tinggal mengedit file conf nya, lakukan perintah : [root@pengecute/Unreal3.2.8.1] pico
unrealircd.conf
nah,
lakukan proses edit, bagian admin serta server yg mau di gunakan, akan
lebih mudah mengedit menggunakan program winscp.
-baiklah, saya anggap sudah selesai di edit,
skrg tinggal menggunakan jurus run : [root@pengecute/Unreal3.2.8.1] ./unreal
start
dah, maka ircd pun
berjalan, heheheh
Opppssss... tunggu dulu, walaupun server udh jalan, tp service seperti
chanserv, nickserv dan botserv blm ada tuh.... nah gimana cara supaya
ada????
MENGINSTALL
SERVICE PADA IRCD (UNREAL/hybrid, dll)
-untuk menginstal service pada ircd, maka
keluar dari folder sampai berada pada root awal shells, kemudian ketik
perintah : [root@pengecute]
wget
http://sourceforge.net/projects/anope/files/anope-stable/Anope%201.8.2/anope-1.8.2.tar.gz/download
-extract file tersebut : [root@pengecute] tar -zxvf
anope-1.8.2.tar.gz
-masuk ke direktory :
[root@pengecute] cd anope-1.8.2
-lakukan 3 jurus andalan : [root@pengecute/anope-1.8.2] ./Config [root@pengecute/anope-1.8.2] make [root@pengecute/anope-1.8.2] make install
- ok, selesai, nah skrg keluar dari folder
anope dengan command :
[root@pengecute/anope-1.8.2] cd ..
-masuk ke folder services : [root@pengecute] cd services
- ambil source config services : [root@pengecute/services] wget
http://www.lifesjourneynetwork.com//plugins/safehtml//HTMLSax3/services.conf
- nah, edit file tersebut : [root@pengecute/services] pico
services.conf (NB: lebih
baik edit menggunakan winscp)
- kalau udh selesai di edit, berarti skrg tinggal menjalankan,
ketik :
[root@pengecute/services] ./services
seeeeeeeppp, skrg service udh ada di ircd
kamu, whois aja dari mirc, contoh : /whois chanserv kalau keliatan, berarti berjalan lancar,
kalau gak keliatan?? bah! nanti aja deh lain kali kita bahas lagi,
wekekekekkek
(NB : semua
tutorial diatas sudah diuji dan menghasilkan server
pengecute.homelinux.net yg running pada port 6667 dan 7000 #scanner
|